Landoll’s innovative trailer solutions directly impact the paving industry with a Detachable series of Lowboy trailers. These trailers are designed to make your driver’s job safer, simpler, and more productive
Landoll’s patented neck has a single hydraulic function. The neck operation is one hydraulic lever which fully detaches and carries the neck away from the lower deck. Reconnecting is just as easy. Back up and the alignment wedge centers the neck and the “A” frame load carrier relocks the lower deck and lifts the trailer to transport position. Choose one of seven ride heights to adjust to the proper transport position.
Drivers need flexibility while loading. With bigger equipment, it’s necessary to make loading onto the lower deck trouble-free. From a clean assist ramp for larger equipment to the fully Hydraulic Power Ramp loading forklifts, pavers and rollers, Landoll gives you the ability to load just about anything just inches from the ground.
Landoll, working in collaboration with Grote Industries, offers new LED diode maker lights to maximize the luminous output with up to 22 lights on every trailer. The rear-facing DOT lights have also been enhanced by adding the fourth tail-turn light to the mud flap bracket. This high visibility light package has substantially increased awareness and is standard equipment on all 400 and 800 series trailers.
Get the most from your equipment dollars, work safely at night, and get the highest return on your investment with a Landoll Detachable or a Landoll traveling axle from the world leader in equipment trailers – Landoll.
Main Frame: Fabricated 11-3/8″, 100,000 PSI Flange
Crossmembers: 6″ High Tensile I-Beams on 21-3/4″ Centers
Gooseneck: 11’9″ with 7 Position Fifth Wheel Ride Hight
Pin Setting: 15″
Swing Clearance: 84″
Hitch: Fifth Wheel Type Automatic Gooseneck Lock Engagement with Lock / Unlock Visual from Tractor Cab
Deck Width: 102″
Loaded Deck Height: 18″
Loaded Ground Clearance: 6.5″
Decking: 1-1/2″ Nominal, Apitong Track Area
Accessories: 3rd Axle Ready, 12″ Swing-Out Outriggers; Half Front Bolster w/ Traction Bars, Lowered Bolster between Tires, HD Sloped Front Approach w/ Traction Bars, Open Boom Trough with “V”-Type Bumper
Storage Area: 1-Between Main Frame at Rear of Lower Deck (41″W x 21″L x 6″D)
Tie Downs: 22 Total, All Angled “D” Rings,
Pivots for Manual Ramps, Double Outrigger Bracket & D-Ring (#209999)
Assist Ramp (Pin Front Approach) (#209999 + #210000 + #213373)
Supspension and Undercarriage
Suspension: Neway RLU250 Air Ride
Grease: Centralized Grease System 25,000 Lb. Capacity Mechanical Ride Height Control Valve
Axles: 2-25,000 Lb. Dual Tire, Oil Bath Bearings; 50″ Spacing; Prepped for Air Inflation